TECHNICAL DATA
7-2
©
200508
Allison MD3060 automatic gearbox
0
ΛΦ45/55 series
3
7.2 TIGHTENING TORQUES
The tightening torques stated in this paragraph
are different from the standard tightening torques
stated in the overview of the standard tightening
torques.
The other threaded connections not specified
must therefore be tightened to the torque
mentioned in the overview of standard tightening
torques.
When attachment bolts and nuts are replaced, it
is important that - unless stated otherwise - these
bolts and nuts are of exactly the same length and
property class as those removed.
Gearbox
Drive flange
Flexplates
Oil cooler
Plugs
Attachment bolts 60 Nm
Bleeder 14 Nm
Main connector 2.5 Nm
Coolant pipes 55 Nm
Rear mounting bracket 100 Nm
PTO bracket 55 Nm
Flywheel housing adapter, M10 x 1.5 55 Nm
Attachment bolt 75 Nm
Flexplate adapter attachment bolts 36 Nm
Torque converter attachment bolts 36 Nm
Hydraulic lines 60 Nm
V300371
2
1
Oil drain plug (1) 28 Nm
Oil filter cover attachment bolts (2) 55 Nm
DAF LF Gearboxes and Clutch Service Manual
To Next Page
Loading...
Need help?
General
