©
200508 4-1
Removal and installation
PNEUMATIC GEARBOX CONTROL
ΛΦ45/55 series
3
3
4. REMOVAL AND INSTALLATION
4.1 REMOVAL AND INSTALLATION, FILTER/GOVERNOR
Removal, filter/governor
1. Blow off the air reservoirs.
2. Unscrew the air pipes.
3. Remove the two attachment bolts from the
filter/governor and remove the filter/
governor.
Installation, filter/governor
1. Install the filter/governor on the attachment
bracket. Tighten the attachment bolts to the
specified torque. See "Technical data".
2. Fit the air pipes.
3. Pressurise the system.
4. Check the system for air leakage.
5. Check the operation of the valve. See
"Inspection and adjustment".
DAF LF Gearboxes and Clutch Service Manual
To Next Page
Loading...
Need help?
General
