©
200508 5-1
Draining and filling
ZF 6S-850 GEARBOX
ΛΦ45/55 series
3
5
5. DRAINING AND FILLING
5.1 DRAINING AND FILLING GEARBOX
To prevent skin injury, avoid
unnecessary contact with the
drained oil.
Draining the gearbox
1. Place the vehicle on a level and horizontal
surface.
2. Drain the gearbox at operating temperature
using plug (B).
Filling the gearbox
1. Clean the drain plug and fit it, tightening to
the specified torque; see "Technical data".
2. Top up oil through the level check/filling
opening (A) until the oil reaches the rim of the
filling opening.
3. After filling the gearbox, tighten the level
check plug to the specified torque; see
"Technical data".
}
B
M3038
A
DAF LF Gearboxes and Clutch Service Manual