ALLISON 1000 & 2000 AUTOMATIC GEARBOXES
4-4
©
200508
Removal and installation
7
ΛΦ45/55 series
3
The selector shaft must not be
turned while the attachment nut is
being loosened or tightened. While
loosening or tightening the
attachment nut, lock the selector
shaft using the selector arm and an
appropriate tool.
6. Fit the selector cable into the selector arm.
Note:
The attachment of the selector cable must be
fitted so that the connecting pin can move
freely in every gear.
V3 00 482
}
DAF LF Gearboxes and Clutch Service Manual
To Next Page
Loading...
Need help?
General
