DAF LF45 Series Service Manual

ALLISON 1000 & 2000 AUTOMATIC GEARBOXES
5-2
©
200508
Draining and filling
7
ΛΦ45/55 series
3
Filling gearbox
1. Clean the drain plugs, provide them with new
sealing rings and fit them, tightening to the
specified torque. See "Technical data".
2. Fill the gearbox through the dipstick holder
with the specified quantity of oil; see
"Technical data".
3. Start the engine and run it at idling speed.
4. If only gearbox oil escapes, tighten the bleed
screw (3) to the specified torque. See
"Technical data".
5. While the engine is idling, add gearbox oil
until the oil level is between the "Cold add"
mark and the "Cold full" mark.
6. Check the oil level. See "Inspection and
adjustment".
HOT
FULL
COLD
FULL
HOT
ADD
COLD
ADD
W 3 03 099
DAF LF Gearboxes and Clutch Service Manual

DAF LF45 Series Specifications

General

Brand	DAF
Model	LF45 Series
Category	Trucks
Language	English