Danfoss VACON 100 FLOW Series - Page 161

10.11.7 (ID 880) FB Data IN 5
Location in the menu: V2.12.7
This monitoring value shows the raw value of process data in a 32-bit signed format.
10.11.8 (ID 881) FB Data IN 6
Location in the menu: V2.12.8
This monitoring value shows the raw value of process data in a 32-bit signed format.
10.11.9 (ID 882) FB Data IN 7
Location in the menu: V2.12.9
This monitoring value shows the raw value of process data in a 32-bit signed format.
10.11.10 (ID 883) FB Data IN 8
Location in the menu: V2.12.10
This monitoring value shows the raw value of process data in a 32-bit signed format.
10.11.11 (ID 864) FB Status Word
Location in the menu: V2.12.11
This monitoring value shows the status of the fieldbus status word that the application uses in bypass mode. Depending on the
fieldbus type or profile, the data can be modified before it is sent to the fieldbus.
Bit
Value = 0 (FALSE)
Value = 1 (TRUE)
Bit 0
Not ready to operate
Ready to operate
Bit 1
Not running
Running
Bit 2
Behavior depends on P3.6.17.
Behavior depends on P3.6.17.
Bit 3
No fault
Fault is active
Bit 4
No alarm
Alarm is active
Bit 5
Requested speed not reached
Running at requested speed
Bit 6
Actual speed of the drive not zero
Actual speed of the drive is zero
Bit 7
Motor not magnetized (flux not ready)
Motor magnetized (flux ready)
Bit 8
Reserved
Reserved
Bit 9
Reserved
Reserved
Bit 10
Reserved
Reserved
Bit 11
Reserved
Reserved
Bit 12
Reserved
Reserved
Bit 13
Reserved
Reserved
Bit 14
Reserved
Reserved
Bit 15
Reserved
Reserved
10.11.12 (ID 865) FB Speed Actual
Location in the menu: V2.12.12
This monitoring value shows the actual speed of the drive as a percentage of minimum frequency and maximum frequency. The
value 0% indicates the minimum frequency and the value 100% indicates the maximum frequency. This monitoring value is contin-
uously updated depending on the momentary min and max frequencies and the output frequency.
AB298035655957en-000201 / DPD01083 | 161Danfoss A/S © 2023.08
Monitoring Value Descriptions
VACON® 100 FLOW
Application Guide