Datalogic Gryphon I GD4100 User Manual

RF Features
162 Gryphon™ I GD4100/GM4100
Configuration Update
Automatic Configuration Update
When this feature is enabled, a reader and its linked Base Station can automatically ensure they
stay in sync with regard to application hardware and/or configuration. This is accomplished by
the linked reader and Base Station comparing application version number and configuration file
check sum. If either is different, the Base Station will automatically update the reader with its
application/configuration.
If the units are linked, any changes made to the Base Station configuration through the sc
an
utility software will automatically be sent to the reader at the completion of the programming
session.
In the same way, any changes made to the linked reader’s configuration
will also be transmitted
to the Base Station when the reader exits Programming Mode.
If Auto Configuration update is enabled, it can also be done when the reader
is installed on its
base station.
ENTER/EXIT PROGRAMMING MODE
Automatic Configuration Update = Disable
Automatic Configuration Update = Enable
DEFAULT

Datalogic Gryphon I GD4100 Specifications

General

Brand	Datalogic
Model	Gryphon I GD4100
Category	Barcode Reader
Language	English