To Next Page

To Previous Page

Symbologies

346 Gryphon™ I GD4100/GM4100

Code 93 Decoding Level

Specifies the decoding level for Code 93. Decoding Levels are used to configure a barcode

symbology decoder to be very aggressive to very conservative depending on a particular

customer’s needs.

• Choosing Level 1 results in a very conservative decoder at the expense of not being able to

read poorly printed or damaged labels.

• Choosing Level 5 results in a very aggressive decoder. This aggressive behavior allows

decoding of poorly printed and d

amaged labels

at the expense of increasing the likelihood

of decoding errors.

• Choosing Level 3, which is the default setting, allows th

e majority of product labels to be

decoded.

There are many factors that determine when to change the decoding level for a particular

symbology. These factors include spots, voids, non-uniform bar/space widths, damaged

labels, etc. that may be experienced in some barcode labels. If there are many hard to read

or damaged labels that cannot be decoded using a conservative setting, increase the de-

coding level to be more aggressive. If the majority of labels are very good quality labels,

or there is a need to decrease the possibility of a decoder error, lower the decoding level

to a more conservative level.

ENTER/EXIT PROGRAMMING MODE

Code 93 Decoding Level = Disable

Code 93 Decoding Level = 1

Code 93 Decoding Level = 2

Code 93 Decoding Level = 3

DEFAULT

Datalogic Gryphon I GD4100 User Manual

Other manuals for Datalogic Gryphon I GD4100