Configuration Update
Product Reference Guide 163
Copy Configuration to Scanner
Scan the following label to copy the current Base Station configuration to the scanner. Use this
method when the Auto Configuration Update feature is disabled and you want a one-time
configuration update to be performed on the scanner.
NOTE
Copy Configuration to Scanner
Copy Configuration to Base Station
Scan the following label to copy the current scanner configuration to the Base Station. Use this
method when the Auto Configuration Update feature is disabled and you want a one-time
configuration update to be performed on the Base Station.
Copy Configuration to Base Station
NOTE
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunc-
tion with this barcode.
Do not scan an ENTER/EXIT PROGR
AMMING MODE label with this bar-
co
de.
To Next Page
Loading...
Need help?
General
