General Features
62 Gryphon™ I GD4100/GM4100
Display Mode
The user can control the reader display behavior according to the following selections:
Local Echo mode: When a barcode is
read with the reader:
• The code is sent to the Host.
• The reader display is cleared.
• The code is also sent to the reader display (Local Echo).
• The cursor is positioned after the last printed character on the reader display.
Nor
mal mode: When a barcode is read with the reader:
• The code is sent to the H
ost.
• The reader display is not cleared. Therefore if
any previous data was displayed on the
reader screen it remains.
• Ther
e is no Local Echo to the reader display.
Clear Di
splay After Decode mode: When a barcode is read with the reader:
• The code is sent to the Host.
• The reader display is cleared. Therefore if any previous data was displayed on the reader
scre
en it is cancelled and the screen remains blank.
• There is no Local Echo of the code to the reader display.
Host
messages sent to the reader are always written to the reader display.
ENTER/EXIT PROGRAMMING MODE
Local Echo mode
Normal mode
Clear display after decode
To Next Page
Loading...
