Datalogic 2 of 5
Product Reference Guide 293
Datalogic 2 of 5 Character Correlation
When correlation is enabled, the barcode reader will combine label data from multiple scans
when decoding. Enabling correlation will help the scanner read labels that have some spots and/
or voids. It may also help read labels that have damaged areas. Enabling correlation will also
increase the chances that a label will be read incorrectly.
ENTER/EXIT PROGRAMMING MODE
I 2 of 5 Character Correlation = Disable
I 2 of 5 Character Correlation = Enable
Datalogic 2 of 5 Stitching
This option enables/disables stitching for Datalogic 2 of 5 labels. When parts of a Datalogic 2 of
5 barcode are presented to the reader with this feature enabled, the barcode parts will be
assembled by the reader’s software, and the data will be decoded if all barcode proofing
requirements are met.
ENTER/EXIT PROGRAMMING MODE
Datalogic 2 of 5 Stitching = Disable
Datalogic 2 of 5 Stitching = Enable
DEFAULT
DEFAULT
To Next Page
Loading...
Need help?
General
