Code 128
Product Reference Guide 239
Code 128 Set Length 2 — cont.
Code 128 Character Correlation
When correlation is enabled, the barcode reader will combine label data from multiple scans
when decoding. Enabling correlation will help the scanner read labels that have some spots and/
or voids. It may also help read labels that have damaged areas. Enabling correlation will also
increase the chances that a label will be read incorrectly.
ENTER/EXIT PROGRAMMING MODE
Code 128 Character Correlation = Disable
Code 128 Character Correlation = Enable
ENTER/EXIT PROGRAMMING MODE
Selec
t Code 128 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to
abort and not save the entry string. You can then
start again at the beginning.
CANCEL
DEFAULT
80 = Length 2 is 80 Characters
DEFAULT
To Next Page
Loading...
Need help?
General
