Scanning Features
Product Reference Guide 49
Stand Mode Triggered Timeout
This feature specifies the time to remain in Tr i g g e r S i n g l e mode after the trigger is pulled while
in Stand Mode.
NOTE
ENTER/EXIT PROGRAMMING MODE
Stand Mode Triggered Timeout = 0.5 Seconds
DEFAULT
Stand Mode Triggered Timeout = 1.5 Seconds
Stand Mode Triggered Timeout = 2 Seconds
Stand Mode Triggered Timeout = 3 Seconds
Stand Mode Triggered Timeout = 4 Seconds
This timeout is only used when the Scan M
ode is configured as
Stand Mode.
This feature is valid only for corded models.
To Next Page
Loading...
Need help?
General
