Datalogic QuickScan I QD21 1 Series - EAN Two Label; EAN Two Label Enable;Disable; EAN Two Label Combined Transmission

Symbologies Enter/Exit Programming Mode
Product Reference Guide 107
EAN Two Label
EAN Two Label Enable/Disable
When disabled, the reader will not read EAN two label bar codes.
EAN Two Label = Disable
EAN Two Label = Enable
EAN Two Label Combined Transmission
This feature enables/disables transmission of an EAN two label pair as one
label. The label type for EAN two label pairs is EAN 13.
EAN Two Label = Disable
EAN Two Label = Enable
$CN2EN00
$CN2EN01
DEFAULT
$CN2CT00
$CN2CT01
DEFAULT