Enter/Exit Programming Mode Datalogic 2 of 5
172 QuickScan™ I QD21X1 / QM21X1 / QBT21X1
Datalogic 2 of 5 Set Length 2
This feature specifies one of the bar code lengths for Datalogic 2 of 5 Length
Control on page 170. Length 2 is the maximum label length if in Variable
Length on page 163 Mode, or the second fixed l
ength if in Fixed Length on
page 163 Mode. The length includes
the bar code’s check and data characters.
The length can be set from 2 to 50 characters. A setting of 00 specifies to
ignore this length (only one fixed length). See "Set Length 2" on
page 307 for
more detailed programming instructions.
Select Datalogic 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
$CD2L2
~
DEFAULT
50 = Length 2 is 50 Characters
To Next Page
Loading...
