Enter/Exit Programming Mode Codablock F
234 QuickScan™ I QD21X1 / QM21X1 / QBT21X1
Codablock F Set Length 2
This feature specifies one of the bar code lengths for Codablock F Length Con-
trol on page 232. Length 2 is the maximum label length if in Variable Length on
page 232 Mode, or the second fixed length if in Fixed Length on
page 232
Mode. Length includes the bar code’s chec
k, data, and full-ASCII shift charac-
ters. The length does not include start/stop characters.
The length can be set from 3 to 255 characters. A setting of 00 specifies to
ig
nore this length (only one fixed length). See "Set Length 2" on
page 307 for
more detailed programming instructions.
Select Codablock F Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
$CCFL2
~
100 = Length 2 is 100 Characters
To Next Page
Loading...
Need help?
General
