Symbologies Enter/Exit Programming Mode
Product Reference Guide
171
Datalogic 2 of 5 Set Length 1
This feature specifies one of the bar code lengths for Datalogic 2 of 5 Length
Control on page 170. Length 1 is the minimum label length if in Variable Length
Mode, or the first fixed length
if in Fixed Length Mode. The length includes the
bar code’s check and data characters.
The length can be set from 2 to 50 characte
rs in increments of two. Length
includes the bar code’s data characters. See "Set Length 1" on
page 306 for
detailed programming instructions.
Select Datalogic 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
$CD2L1
~
DEFAULT
06 = Length 1 is 6 Characters
To Next Page
Loading...
