Symbologies Enter/Exit Programming Mode
Product Reference Guide
185
Codabar Set Length 2
This feature specifies one of the bar code lengths for Codabar Length Control
on page 183. Length 2 is the maximum label length if in Variable Length on
page 183 Mode, or the second fi
xed length if in Fixed Length on page 183
Mode. The length includes the bar code’s sta
rt, stop, check and data charac-
ters. The length must include at least one data character.
The length can be set from 3 to 50 characte
rs in increments of two. A setting of
00 specifies to ignore this length (only one fixed length). See "Set Length 2" on
page 307 for more detailed programming instructions.
Select CodabarLength 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
$CCBL2
~
DEFAULT
50 = Length 2 is 50 Characters
To Next Page
Loading...
Need help?
General
