Datalogic QuickScan I QD21 1 Series - Code 93 Check Character Transmission; Code 93 Length Control

Enter/Exit Programming Mode Code 93
224 QuickScan™ I QD21X1 / QM21X1 / QBT21X1
Code 93 Check Character Transmission
Enables/disables transmission of an optional Code 93 check character.
Code 93 Check Character Transmission = Disable
Code 93 Check Character Transmission = Enable
Code 93 Length Control
This feature specifies either variable length decoding or fixed length decoding
for the Code 93 symbology.
Variable Length: For variable length decoding, a minimum and maximum length
may be set.
Fixed Length: For fixed length decoding, two different lengths may be set.
Code 93 Length Control = Variable Length
Code 93 = Fixed Length
$CC9CT00
$CC9CT01
DEFAULT
$CC9LC00
$CC9LC01
DEFAULT