Datalogic QuickScan I QD21 1 Series - Isbt 128; ISBT 128 Concatenation; ISBT 128 Concatenation Mode

Enter/Exit Programming Mode ISBT 128
214 QuickScan™ I QD21X1 / QM21X1 / QBT21X1
ISBT 128
The following options apply to the ISBT 128 symbology.
ISBT 128 Concatenation
Enables/disables ISBT128 concatenation of 2 labels.
ISBT 128 Concatenation = Disable
ISBT128 Concatenation = Enable
ISBT 128 Concatenation Mode
Specifies the concatenation mode between Static and Dynamic.
ISBT 128 Concatenation Mode = Static
ISBT 128 Concatenation Mode = Dynamic
$CI8CE00
$CI8CE01
DEFAULT
NOTE
This option is only valid when
ISBT 128 Concatenation on page 214 is enabled
(see page 11-214).
$CI8CM00
$CI8CM01
DEFAULT