Enter/Exit Programming Mode Standard 2 of 5
204 QuickScan™ I QD21X1 / QM21X1 / QBT21X1
Standard 2 of 5 Set Length 1
This feature specifies one of the bar code lengths for Standard 2 of 5 Length
Control on page 203. Length 1 is the minimum label length if in Variable Length
on page 203 Mode, or the first fixed length if in Fixed Length on page 203
Mode. Length includes the bar cod
e’s check and data characters.
The length can be set from 1 to 50 characters. See "Set Length 1" on page 306
for more detailed programming in
structions.
Select Standard 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
$CS2L1
~
DEFAULT
08 = Length 1 is 8 Characters
To Next Page
Loading...
