Datalogic QuickScan I QD21 1 Series - Code 4 and Code 5 Common Configuration Items; Code 4 and 5 Decoding Level

Enter/Exit Programming Mode Code 4 and Code 5 Common Configuration Items
238 QuickScan™ I QD21X1 / QM21X1 / QBT21X1
Code 4 and Code 5 Common Configuration Items
The following options apply to both Code 4 and Code 5 symbologies.
Code 4 and 5 Decoding Level
Decoding Levels are used to configure a bar code symbology decoder to be very
aggressive to very conservative, depending on customer needs. See "Decoding
Levels" on
page 305 for more detailed programming instructions.
NOTE
Code 4 and Code 5 Decoding Level = Disable
Code 4 and Code 5 Decoding Level = 1
Code 4 and Code 5 Decoding Level = 2
Code 4 and Code 5 Decoding Level = 3
Code 4 and Code 5 Decoding Level = 4
Code 4 and Code 5 Decoding Level = 5
This configuration item applies to Code 4 and Code 5.
$CC5DL00
$CC5DL01
$CC5DL02
$CC5DL03
$CC5DL04
$CC5DL05
DEFAULT