Enter/Exit Programming Mode Interleaved 2 of 5 (I 2 of 5)
164 QuickScan™ I QD21X1 / QM21X1 / QBT21X1
I 2 of 5 Set Length 1
This feature specifies one of the bar code lengths for I 2 of 5 Length Control on
page 163. Length 1 is the minimum label length if in Variable Length Mode, or
the first fixed length if in Fixed Length Mode. The length includes the bar
code’s check and da
ta characters.
The length can be set from 2 to 50 characte
rs in increments of two. See "Set
Length 1" on
page 306 for more detailed programming instructions.
Select I 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
$CI2L1
~
DEFAULT
06 = Length 1 is 6 Characters
To Next Page
Loading...
Need help?
General
