Enter/Exit Programming Mode Label ID
62 QuickScan™ I QD21X1 / QM21X1 / QBT21X1
Label ID
A Label ID is a customizable code of up to three ASCII characters (each can be
one of hex 0x01-0xFF), used to identify a bar code (symbology) type. It can be
appended previous to or following the transmitted bar code data depending
upon how this option is enabled. This feature provides options for configuring
custom Label IDs as a pre-loaded set (see "Label ID: Pre-loaded Sets" on
page 62) or individually per symbology (see "Label ID: Set Individually Per Sym-
bology" on
page 63). If you wish to program the reader to always include an
industry standard label iden
tifier for ALL symbology types, see the previous
feature "Global AIM ID" on
page 61.
Label ID: Pre-loaded Sets
The reader supports two pre-loaded sets of Label IDs. Shown is the USA set
and the EU set. See "Label ID: Pre-loaded Sets" on
page 293 for more informa-
tion concerning the pre-loaded sets that are provided.
CAUTION
Label ID Pre-loaded Set = USA Set
Label ID Pre-loaded Set = EU Set
When changing from one Label ID set to another, all other reader con-
figuration settings, including the host interface type, will be erased
a
nd set to the factory defaults. Any custom configuration or custom
defaults will be lost.
$AE
$Ae
DEFAULT
To Next Page
Loading...
Need help?
General
