Enter/Exit Programming Mode Code 39
142 QuickScan™ I QD21X1 / QM21X1 / QBT21X1
Code 39 Set Length 2
This feature specifies one of the bar code lengths for Code 39 Length Control
on page 140. Length 2 is the maximum label length if in Variable Length on
page 140 Mode, or the second fixed length if in Fixed Length on
page 140
Mode. Length includes the bar code’s chec
k, data, and full-ASCII shift charac-
ters. The length does not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 00 specifies to
ig
nore this length (only one fixed length). See "Set Length 2" on
page 307 for
more detailed programming instructions.
Select Code 39Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
$CC3L2
~
DEFAULT
50 = Length 2 is 50 Characters
To Next Page
Loading...
Need help?
General
