Enter/Exit Programming Mode Codabar
184 QuickScan™ I QD21X1 / QM21X1 / QBT21X1
Codabar Set Length 1
This feature specifies one of the bar code lengths for Codabar Length Control
on page 183. Length 1 is the minimum label length if in Variable Length on
page 183 Mode, or the first fixed length if in Fixed Length on page 183 Mode.
Length includes the bar code’s start, st
op, check and data characters. The
length must include at least one data character.
The length can be set from 3 to 50 characte
rs in increments of two. See "Set
Length 1" on
page 306 for more detailed programming instructions.
Select Codabar Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
$CCBL1
~
DEFAULT
03 = Length 1 is 3 Characters
To Next Page
Loading...
Need help?
General
