Datalogic QuickScan I QD21 1 Series - Good Read: When to Indicate

Enter/Exit Programming Mode LED and Beeper Indicators
78 QuickScan™ I QD21X1 / QM21X1 / QBT21X1
Good Read: When to Indicate
This feature specifies when the reader will provide indication (beep and/or flash
its green LED) upon successfully reading a bar code. Choices are:
• Good Read = Indicate after decode
• Good Read = Indicate after transmit
• Good Read = Indicate after CTS
goes inactive, then activ
NOTE
This option, which uses CTS, is only va
lid for Q21XX models with RS-232
interfaces.
e
$CBPIN00
Indicate Good Read = After Decode
$CBPIN01
Indicate Good Read = After Transmit
$CBPIN02
Indicate Good Read = After CTS Goes Inactive, Then Active
DEFAULT