Product Reference Guide 3
Chapter 2
Setup
About the Reader
One distinctive feature offered by the reader is a very wide scan angle which
can read long linear bar codes, such as utility bills. Whether used in Single Trig
-
ger or Continuous Mode, the ergonomic design of the reader will help to pro-
mote comfortable handling during extended periods of use.
The reader can communicate using the following interfaces:
RS-232:
The reader can communicate with a standard or Wincor-Nixdorf (W-N)
RS-232 host.
RS-232 OPOS:
This interface is used for OPOS/UPOS/JavaPOS systems.
Keyboard Wedge (KBW) :
When connected using this interface, the host interprets
scanned data as keystrokes and supports several international keyboards (for
the Windows
®
environment). See
"Country Mode"
on page 46 for a full listing.
USB:
Select to communicate either by USB OEM, USB COM STD, or USB Keyboard
interface types by scanning the appropriate interface type bar codes available in
this manual. The default interface is USB-KBD for Wedge models (7230) and
USB-OEM for IBM models (7210).
Unpacking
Check carefully to ensure the reader and any accessories ordered are present
and undamaged. If any damage occurred during shipment, contact
Technical
Support on page 2.
KEEP THE PACKAGING. Should the unit ever require service, it should be
returned in its original shipping container.
To Next Page
Loading...
Need help?
General
