Symbologies Enter/Exit Programming Mode
Product Reference Guide
165
I 2 of 5 Set Length 2
This feature specifies one of the bar code lengths for I 2 of 5 Length Control on
page 163. Length 2 is the maximum label length if in Variable Length Mode, or
the second fixed length if in Fixed Length Mode. The length includes the bar
code’s check and da
ta characters.
The length can be set from 2 to 50 characte
rs in increments of two. A setting of
0 specifies to ignore this length (only one fixed length). See "Set Length 2" on
page 307 for more detailed programming instructions.
Select I 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
$CI2L2
~
DEFAULT
50 = Length 2 is 50 Characters
To Next Page
Loading...
Need help?
General
