Enter/Exit Programming Mode Code 11
196 QuickScan™ I QD21X1 / QM21X1 / QBT21X1
Code 11 Set Length 2
This feature specifies one of the bar code lengths for Code 11 Length Control
on page 194. Length 2 is the maximum label length if in Variable Length on
page 194 Mode, or the second fixed length if in Fixed Length on
page 194
Mode. Length includes the bar cod
e’s check and data characters.
The length can be set from 2 to 50 characters. A setting of 00 specifies to
ignore this length (only one fixed length). See "Set Length 2" on
page 307 for
more detailed programming instructions.
Select Code 11 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
$CC1L2
~
DEFAULT
50 = Length 2 is 50 Characters
To Next Page
Loading...
Need help?
General
