Reading Parameters Enter/Exit Programming Mode
Product Reference Guide
85
Stand Mode Triggered Timeout (continued)
Stand Detection
Specifies the behavior of the scanner when placed in a stand that contains
autorecognition hardware.
Ignore Autorecognition
Switch to Stand Mode
Switch to Always On
Switch to Flashing
$CSNOT0C
Stand Mode Triggered Timeout = 6 Seconds
$CSNOT10
Stand Mode Triggered Timeout = 8 Seconds
$CSNOT00
Stand Mode Triggered Timeout = Switch back to Trigger Single on
trigger pull
DEFAULT
To Next Page
Loading...
