Enter/Exit Programming Mode Standard 2 of 5
206 QuickScan™ I QD21X1 / QM21X1 / QBT21X1
Standard 2 of 5 Character Correlation
When correlation is enabled, the bar code reader will combine label data from
multiple scans when decoding. Enabling correlation will help the reader read
labels that have some spots and/or voids. It may also help read labels that have
damaged areas. Enabling correlation will also increase the chances that a label
will be read incorrectly.
Standard 2 of 5 Character Correlation = Disable
Standard 2 of 5 Character Correlation = Enable
Standard 2 of 5 Stitching
This option enables/disables stitching for Standard 2 of 5 labels. When parts of
a Standard 2 of 5 bar code are presented to the reader with this feature
enabled, the bar code parts will be assembled by the reader’s software, and the
data will be decoded if all bar code proofing requirements are met.
Standard 2 of 5 Stitching = Disable
Standard 2 of 5 Stitching = Enable
$CS2CO00
$CS2CO01
DEFAULT
$CS2ST00
$CS2ST01
DEFAULT
To Next Page
Loading...
Need help?
General
