Symbologies Enter/Exit Programming Mode
Product Reference Guide
209
Industrial 2 of 5 Set Length 1
This feature specifies one of the bar code lengths for Industrial 2 of 5 Length
Control on page 208. Length 1 is the minimum label length if in Variable Length
Mode, or the first fixed length if in Fixed Length Mod
e. Length includes the bar
code’s data characters only.
The length can be set from 1 to 50 characters, and includes check and data
c
haracters. See "Set Length 1" on pa
ge 306 for more detailed programming
instructions.
Select Industrial 2 of 5 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
$CU2L1
~
01 = Length 1 is 1 Character
To Next Page
Loading...
