RS-232 and USB-COM Interfaces Enter/Exit Programming Mode
Product Reference Guide
41
ACK NAK Retry Count
This feature specifies the number of times the reader retries a label transmis-
sion due to a retry condition. The selectable range is from 1 to 254 retries. A
se
lection of 0 disables the count, and a selection of 255 specifies unlimited
retries. See "ACK NAK Retry Count" on
page 284 for more detailed program-
ming instructions.
Select ACK NAK Retry Count Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
$CR2AR
~
DEFAULT
To Next Page
Loading...
