Enter/Exit Programming Mode
Product Reference Guide
259
Docking Beep
Enables/disables a beep indication when the handheld is placed in the Base
Station.
Docking Beep = Disable
Docking Beep = Enable
Leash Alarm
This setting specifies the number of seconds to sound the Leash Mode beeps
(three per second) when the handheld goes out of range. This is especially use-
ful in instances where the reader might inadvertently have been placed in a bag
or car
t.
For this mode to be effective, the reader
must be linked to the Base Station. If
the reader is asleep or disconnected from the Base Station, there is no way for it
to know where it is relative to the Base Station because communication is not
active between the devices.
DEFAULT
Leash Alarm = Disabled
Leash Alarm = 1 Second
Leash Alarm = 2 Seconds
To Next Page
Loading...
