Enter/Exit Programming Mode
Product Reference Guide
267
Bluetooth-Only Features
The features in this section are valid only for QuickScan Bluetooth models.
RF ADDRESS STAMPING
These features allow configuration of source radio data inclusion.
Source Radio Address Transmission
Enables/disables the ability of source radio address information to be transmit-
ted to the host and, if so, at what posit
ion with respect to the label data. See
page 308 in “References” for detailed informatio
n and examples for setting this
feature.
NOTE
Source Radio Address Transmission = Do Not Include
Source Radio Address Transmission = Prefix
When included as a prefix, the source-radio ID is displayed after all
label formatting has been applied. The 6 byte hex address is sent as
12 ascii characters, i.e., an address of 00 06 66 00 1A ED will be sent as
(shown in hex): 30 30 30 36 36 36 30 30 31 41 45 44
To Next Page
Loading...
