To Next Page

To Previous Page

Enter/Exit Programming Mode

270 QuickScan™ I QD21X1 / QM21X1 / QBT21X1

BT Pin Code

After enabling Security Mode (see "BT Security Mode" on page 269), specify

whether you want to set a 4-digit or a 16-digit PIN Code. See page 310 for

detailed information and examples for setting this feature.

Select PIN Code Length

Select 4-character BT PIN Code

Select 16-character BT PIN Code

Set PIN Code

Determine the desired characters for the PIN code, then convert to hexadecimal

using the ASCII Chart on the inside back cover of this manual. See page 310 for

detailed information and examples for setting this feature.

Set 4-character BT Pin Code

To configure this feature, scan the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the desired bar

code , fo

llowed by the digits from the Alphanumeric char-

acters in

Appendix D

. Keypad representing your

desired character(s). End by scanning the ENTER/EXIT

bar code again.

Set 16-character BT PIN Code

CANCEL

Make a mistake? Scan the CANCEL barcode to abort and

not save the entry string. You can then start again at the

beginning.

DEFAULT

31323334 = Default PIN Code is 1234

Datalogic QuickScan I QD21 1 Series User Manual

Questions and Answers: