Enter/Exit Programming Mode
272 QuickScan™ I QD21X1 / QM21X1 / QBT21X1
BT HID Country Mode
When the reader is connected with a Bluetooth Adapter in HID mode, this fea-
ture allows to set the country where the PC is localized. Read one of the config-
uration command labels listed at page 46.
BT HID Caps Lock State Control
This option specifies the format in which the reader sends character data.
Please refer to page 49 for programming this feature.
BT HID Intercharacter Delay Control
Please refer to page 288 for programming this feature.
BT HID Toggle On-Screen Keyboard
When scanner is connected to Apple™ Bluetooth® devices via HID profile, a
double click on the trigger of the barcode reader will toggle the on-screen vir
-
tual keyboard.
BT Friendly Name
You can set a meaningful name for QuickScan QBT2131 that will appear in the
application during device discovery.
To set a new Bluetooth Friendly Name, scan the barcode below and follow the
instructions.
Set Bluetooth Friendly Name
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by a maximum 64 digits from the
Alphanumeric characters in
Appendix D
- Keypad.
The digits must be the hexadecimal ASCII representa-
tion of the desired characters. If less than the expected
string of 32 characters are selected, scan the ENTER/
EXIT bar code to terminate the string.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
CANCEL
QUICKSCAN-QBT2131
[SERIAL_NUMBER_SCANNER]
DEFAULT
To Next Page
Loading...
Need help?
General
