EasyManua.ls Logo

Dell Pro Rugged 13 - Page 174

Dell Pro Rugged 13
199 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 52. System Setup optionsStorage menu(continued)
Storage
By default, the Secure Digital (SD) Card option is enabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Secure Digital (SD) Card Read-Only Mode Enables or disables the SD card read-only mode.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
By default, the Secure Digital (SD) Card Read-Only Mode option is disabled.
Table 53. System Setup optionsDisplay menu
Display
Display Brightness
Brightness on battery power
By default, the screen brightness is set to 50 when the computer is running
on battery power. Set the screen brightness when the computer is running on
battery power.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Brightness on AC power By default, the screen brightness is set to 100 when the computer is running on
AC power. Set the screen brightness when the computer is running on AC power.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Touchscreen Enables or disables the touch screen option.
By default, the Touchscreen option is enabled.
NOTE: Only available on computers with touch screen displays.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Full Screen Logo Enables or disables the computer to display full screen logo, if the image matches
screen resolution.
By default, the Full Screen Logo option is disabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Limit Panel Brightness to 50% Allows you to limit the panel brightness to 50%.
By default, the Limit Panel Brightness to 50% option is turned is off.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Table 54. System Setup optionsConnection menu
Connection
Wireless Device Enable
WWAN/GPS Enables or disables the internal WWAN device.
By default, the WWAN/GPS option is enabled.
WLAN Enables or disables the internal WLAN device.
By default, the WLAN option is enabled.
174 BIOS Setup

Table of Contents

Related product manuals