Table 58. System Setup options—Update, Recovery menu(continued)
Update, Recovery
BIOSConnect Enables or disables cloud service operating system recovery if the main operating
system fails to boot with the number of failures equal to or greater than the
value specified by the Auto OS Recovery Threshold setup option and local service
operating system does not boot or is not installed.
By default, the BIOSConnect option is enabled.
Dell Auto OS Recovery Threshold Allows the control of the automatic boot flow for the SupportAssist System
Resolution Console and the Dell OS Recovery Tool.
By default, the Dell Auto OS Recovery Threshold value is set to 2.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Table 59. System Setup options—System Management menu
System Management
Service Tag Displays the Service Tag of the computer.
Asset Tag Creates a computer Asset Tag that an IT administrator can use to uniquely
identify a particular computer.
NOTE: Once set in the BIOS, the Asset Tag cannot be changed.
AC Behavior
Wake on AC Enables or disables the computer to turn on and go to boot when AC power is
supplied to the computer.
By default, the Wake on AC option is disabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Wake on LAN Enables or disables the computer to turn on by a special LAN signal.
By default, the Wake on LAN option is disabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Auto On Time Enable to set the computer to turn on automatically every day or on a preselected
date and time. This option can be configured only if the Auto On Time is set to
Everyday, Weekdays, or Selected Days.
By default, the Auto On Time option is disabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Intel AMT capability Configure Intel Active Management Technology (AMT) options, which can be
enabled, disabled, or restricted.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
First Power On Date
Set Ownership Date This options allows to set the Ownership date.
By default, the Set Ownership Date option is OFF.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Diagnostics
184 BIOS Setup
To Next Page
Loading...
