Table 59. System Setup options—System Management menu(continued)
System Management
OS agent requests Enable or disable the option for applications running in the operating system to
run with preboot diagnostics on subsequent boots.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Power-On-Self-Test Automatic
Recovery
Enable or disable the automatic recovery of the computer from no power or
no-POST failure by applying mitigation steps.
By default, the Power-On-Self-Test Automatic Recovery option is enabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Table 60. System Setup options—Keyboard menu
Keyboard
Fn Lock Options Enables or disables the Fn Lock option.
By default, the Fn Lock option is enabled.
Lock Mode By default, the Lock Mode Secondary option is enabled. With this option, the
F1-F12 keys scan the code for their secondary functions.
Device Configuration HotKey Access Allows you to control whether you can access device configuration screens
through hotkeys during system startup.
By default, the Device Configuration HotKey Access option is enabled.
NOTE: This setting controls only the Intel RAID (CTRL+I), MEBX (CTRL+P),
and LSI RAID (CTRL+C) Option ROMs. Other preboot Option ROMs, which
support entry using a key sequence, are not affected by this setting.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Table 61. System Setup options—Pre-boot Behavior menu
Pre-boot Behavior
Adapter Warnings
Enable Dock Warning Messages Enables the warning messages during boot when the adapters with less power
capacity are detected.
By default, the Enable Dock Warning Messages option is enabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Warnings and Errors Enables or disables the action to be taken when a warning or error is
encountered.
By default, the Prompt on Warnings and Errors option is selected.
NOTE: Errors deemed critical to the operation of the computer hardware
stop the functioning of the computer.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
USB-C Warnings
Enable Dock Warning Messages Enables the warning messages during boot when the USB-C adapters with less
power capacity are detected.
By default, the Enable Dock Warning Messages option is enabled.
BIOS Setup 185
To Next Page
Loading...
