Chapter 4 Operation Interface｜VP3000
149
4-1-3 Keypad Function Descriptions
4-1-3-1 Keypad Function Descriptions of KPV-CE02
HAND key
1. Operates the drive in HAND mode.
2. Press the HAND key at STOP, then the setting switches to
HAND frequency source and HAND operation source.
Operation Key
1. Only valid when the source of operation command is the
keypad.
2. Operates the AC motor drive.
1. This key has the highest priority when the command is from
the keypad.
2. When it receives the OFF command, regardless of whether
the AC motor drive is in operation or stop status, the AC
motor drive executes the “STOP” command.
1. Operates the drive in AUTO mode.
2. Press the AUTO key at STOP, then the setting switches to
AUTO frequency source and AUTO operation source.
1. In the numeric value setting mode, use the UP/DOWN key to
add and subtract the values.
2. Use the up key to change the number from 0 to 9, and the
down key in reverse.
3. In the menu/text selection mode, selects an item.
1. In the numeric value setting mode, use the UP/DOWN key to
add and subtract the values.
2. In the menu/text selection mode, selects an item.
3. Use down key to enter next option; and the up key to return
to previous option.
1. In the numeric value setting mode, use the Left/ right key to:
• Move the cursor
• Switch between high bit and low bit
• Switch between bit00–32 and the status setting 0–1
2. When setting Calendar, use left/ right keys to switch month,
day, hour and minute.
3. Use left/ right keys to switch the Pr Group, for example,
switch from Group A0 to Group b0.
4. When a fault occurs, use the Left key to reset the fault.
5. When setting the copied file name, use left/ right keys to
move the cursor.
To Next Page
Loading...
