Chapter 4 Operation Interface|VP3000
165
Analog input/ output terminal - check current setting and change setting
For example: check the setting of AI1 (Ai01). When you enter Ai01, the keypad displays g2-06 (Ai01
function selection parameter) first, press [Down key] to display g2-07 (Ai01 input signal type), and
then press [Down key] again to display the current Ai01 input value.
3. Keypad lock
When EntEr displays and flashes, press ENTER again to enable the keypad lock function.
4. App Macros and Quick Setting
App Macros and Quick Setting function includes application macros and quick setting.