Delta VP3000 Series - 10-1-1-2 Option Card Installation Position

Chapter 10 Accessories | VP3000
632
10-1-1-2 Option Card Installation Position
Figure 10-5
Figure 10-6
No.
Option Card Installation Position
1
I/O card (Slot 1)
EMV-D42A; EMV-R6AA; EMV-A22A
2
Communication card (Slot 2)
CMC-PD01; CMC-DN01; CMC-EIP01;
CMC-COP01; CMC-PN01
Table 10-1
Screw specification for option card terminals
EMV-D42A
Wire Gauge
0.2–0.5 mm
2
(26–20 AWG)
Torque
5 kg-cm / (4.4 lb-in.) / (0.5 Nm)
EMV-R6AA
Wire Gauge
0.2–0.5 mm
2
(26–20 AWG)
Torque
8 kg-cm / (7 lb-in.) / (0.8 Nm)
EMV-A22A
Wire Gauge
0.2–4 mm
2
(24–12 AWG)
Torque
5 kg-cm / (4.4 lb-in.) / (0.5 Nm)
Table 10-2