Delta VP3000 Series - 10-1-5-2 CMC-PN01 - Communication card, PROFINET

Chapter 10 Accessories | VP3000
654
10-1-5-2 CMC-PN01 -- Communication card, PROFINET
⚫ Features
CMC-PN01 connects VP3000 drive to PROFINET to exchange data with the host controller
easily. This simple network solution saves cost and time for connection and installation of
factory automation. Moreover, its components are compatible with suppliers.’
By installing CMC-PN01 in VP3000 through the main PROFINET device, you can:
1. Control the drive through PROFINET
2. Modify the drive’s parameters through PROFINET
3. Monitor the drive’s status through PROFINET
⚫ Product File
Figure 10-37
1. Screw fixing hole
2. Positioning hole
3. Ready out indicator
4. MT out indicator
5. SD indicator
6. BF out indicator
7. ACT PHY2 indicator
8. Link PHY2 indicator
9. ACT PHY1 indicator
10. Link PHY1 indicator
11. ON/ OFF switch
12. Fool-proof groove
13. RJ45 port (Port 2)
14. RJ45 port (Port 1)
15. A port to connect with
control board
Label with MAC address
Figure 10-38
Definition
Descriptions
MAC1
Port 1 MAC Address
MAC2
Port 2 MAC Address
MAC3
Interface MAC Address
Table 10-31