Delta VP3000 Series - 10-3-7 USB; RS-485 Communication Interface IFD6530

Chapter 10 Accessories | VP3000
687
10-3-7 USB / RS-485 Communication Interface IFD6530
Warning
 Thoroughly read this instruction sheet before installation and putting it into use.
 The content of this instruction sheet and the driver file may be revised without prior notice. Consult
our distributors or download the most updated instruction/driver version at Delta website.
Introduction
IFD6530 is a convenient RS-485-to-USB converter, which does not require external power-supply
and complex setting process. It supports baud rate from 75 to 115.2 Kbps and auto switching
direction of data transmission. In addition, it adopts RJ45 in RS-485 connector for users to wire
conveniently. And its tiny dimension, handy use of plug-and-play and hot-swap provide more
conveniences for connecting all DELTA IABG products to your PC.
Applicable Models: All DELTA IABG products.
 Application & Dimension
Figure 10-86
Figure 10-87
Specifications
Power supply
No external power is needed
Power Consumption
1.5 W
Isolated Voltage
2,500 V
DC
Baud Rate
75 Kbps, 150 Kbps, 300 Kbps, 600 Kbps, 1,200 Kbps, 2,400 Kbps, 4,800
Kbps, 9,600 Kbps, 19,200 Kbps, 38,400 Kbps, 57,600 Kbps, 115,200
Kbps
RS-485 Connector
RJ45
USB Connector
A type (plug)
Compatibility
Full compliance with USB V2.0 specification
Max. Cable Length
RS-485 Communication Port: 100 m
Support RS-485 half-duplex transmission
Table 10-55