Chapter 7 Second Development Platform VP3000
274
Example:
LD X0
X0
Y0
CNT C0 K5
X1
RST
C0
C0
RST C0
LD X1
CNT C0, K5
LD C0
OUT Y0
1. When X0 = ON, RST instruction is executed, the
current value of C0 returns to zero, and the output
contacts are also reset to OFF.
2. When X1 is OFFON, the current value counts up
(add 1).
3. When the counting of the counter C0 reaches the
setting value K5, the contact of C0 is conducted, the
current value of C0 = setting value = K5 C0 don’t
receive the trigger signal sent from X1 afterward, the
current value of C0 remains at K5.
To Next Page
Loading...
