Delta VP3000 Series - Page 433

Chapter 8 Troubleshooting｜VP3000
424
ID No.
Warning Name
Descriptions
30
Copy model error 3 (SE3)
(SE3)
Keypad COPY error 3: copy model error
Action and Reset
Action Condition
“SE3” warning occurs when different drive identity codes are found during
copying parameters.
Action Time
Immediately act when the error is detected
Warning Setting Parameter
N/A
Reset Method
Manual reset
Reset Condition
No
Record
No
Cause
Corrective Actions
Keypad copy between different
power range drives
It is mainly to prevent parameter copies between different HP/models.
Use the same model ID to upload and download parameter copying.