Delta VP3000 Series - Page 497

Chapter 8 Troubleshooting｜VP3000
488
ID No.
Warning Name
Descriptions
303
Cleaning process warning
(CLE)
Warning occurs when the drive is in cleaning process
Action and Reset
Action Condition
Pr. U3-20 (Pump clean function) is enabled
Action Time
Immediately acts
Warning Setting Parameter
N/A
Reset Method
Automatically resets when the cleaning process completes
Reset Condition
Auto-reset
Record
No
Cause
Corrective Actions
Cleaning function is enabled
Waits for the cleaning process complete or stop the cleaning process.