Delta VP3000 Series - Page 563

Chapter 8 Troubleshooting｜VP3000
554
ID No.
Fault Name
Descriptions
88
Model ID change
(IDCH)
A fault occurs due to power board ID change
Action and Reset
Action Condition
Software detection
Action Time
Immediately act
Fault Treatment Parameter
No
Reset Method
Manual reset
Reset Condition
Immediately reset
Record
Yes
Cause
Corrective Actions
Hardware ID circuit error
Cycle the power after manually reset, If the fault still exists, return to the factory
for repair.
Model ID error
Check if the model name matches with Pr. A0-00 (refer to description in Section
1-1) and cycle the power after manually reset. If the fault still exists, return to the
factory for repair.